RIMS build
- Thread starter medic4963
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Sounds like a really hot room. Have you tried turning the AC on?
Seriously though, you have given us almost no information. What type of temperature probe do you have? Have you changed the PID settings to that probe type? How are you wiring the probe? Be as specific as possible.
Seriously though, you have given us almost no information. What type of temperature probe do you have? Have you changed the PID settings to that probe type? How are you wiring the probe? Be as specific as possible.
Liam_D
New Member
You've not given us much to base any solutions on...
One possibility is that there is a wiring issue and the PID has set the input to high scale value (which these things do sometimes - depends on how they are configured). How have you wired the sensor? Sorry to state the obvious but have you looked in the technical manual for wiring examples?
One possibility is that there is a wiring issue and the PID has set the input to high scale value (which these things do sometimes - depends on how they are configured). How have you wired the sensor? Sorry to state the obvious but have you looked in the technical manual for wiring examples?
Similar threads
