Delaware Electric Brewery (Complete w/Table)

Sold, thanks.

Here's a fairly complete list of what's included:

3 Brew Kettle - Blichmann BoilerMaker (20 Gallon)
1 False Bottom - BoilerMaker (20 Gallon)
4 Stainless steel street elbow 1/2" FPT x 1/2" MPT
1 Standard Size Hop Stopper for Blichmann kettle
13 Stainless steel male quick disconnect 1/2" MPT
10 Stainless steel female quick disconnect 1/2" MPT
1 Stainless steel male quick disconnect 1/2" barb
6 Stainless steel ball valve 1/2" full port, 3-piece
7 Stainless steel closed nipple threaded 1/2" x 1" NPT
2 Stainless steel 1/2" compression x 1/2" FPT fitting
1 Stainless steel 1/2" compression x 1/2" MPT fitting
1 Stainless steel full coupler 1/2" FPT
3 Stainless steel "T" 1/2" FPT
11 Stainless steel 1/2" FPT x 1/2" barb fitting
2 Stainless steel coupler 3/4" FPT x 1/2" FPT
1 Brass 1/2" FPT x 1/2" barb fitting
3 Brass 1/2" hose barb to female garden hose swivel coupling
1 Brass 1/2" hose barb to male garden hose coupling
1 Convoluted counterflow chiller (5/8" diameter inner tube, male/female water hose connections)
6 Vinyl (PVC) tubing 1/2" ID
31 High temperature food-grade silicone tubing (1/2" ID 3/4" OD)
4 Stainless steel 1/2" NPT lock nut
1 50A 50' RV Extension Cord
2 Chugger Pump w/ stainless steel housing (3/4" MPT inlet, 1/2" MPT outlet)
1 2- 5500W Heating Element Kits (PRE-ASSEMBLED)
1 3 Custom Temperature Probes: 2 NPT, 1 Metric
1 Electric Brewery Kit (50A, 30G Batch Capable)
1 50' Stainless HERMS Coil
2 Stainless steel 5/8" compression x 1/2" FPT fitting
1 30x96" stainless work table w/ backsplash and wheels
1 Food grade silicone adhesive/sealan
2 Silicone high temperature o-ring (1-3/16" ID x 1-7/16" OD x 1/8" width)
6 Silicone high temperature o-ring (7/16" ID, 5/8" OD, 3/32" thick)
2 Stainless steel locknut 1" NPS
2 Stainless steel washer/shim (0.075" thick, 1-1/2" ID, 2-1/4" OD)
4 Stainless steel washer/shim (1-1/8" ID, 1-5/8" OD, 1/16" thick)
4 Stainless steel washer/shim (7/8" ID, 1-3/8" OD, 1/16" thick)
2 Stainless steel bushing (reducer) 1/2" MPT x 1/4" FPT
13 Stainless steel smooth-band worm-drive hose clamp (5/8" to 1-1/16" clamp diameter range)
2 BrewMometer Hole Plug for Blichmann pots
4 Silicone high temperature o-ring (13/16" ID, 1-1/16" OD, 1/8" thick)

if you are parting out...
i'm interested in a pump. how much for one kettle?

2nd on a pump or Both if above backs out, and the MM3 mill/motorized parts

I'm local and am interested in some of these components if you decide to part this out.

Off topic but could you link me to where you got your table please?

Loodachris said:

Off topic but could you link me to where you got your table please?

Click to expand...

Prima Supply

interested in pump and quick disconnects w/hoses if u decide to part, also if u decide to sell the monster mill i am definitely interested (as well as the gtr...haha)

If you end up piecing it out, I'm interested in a lot of the stainless fittings and second in line for the quick disconnects and hosing.

RyanITV said:

Total in the build is about $6300 (plus hours of my time building and securing the parts). $5000 and it's yours.



Ryan

Click to expand...

That is a great price I just priced out going to electric from propane and I am keeping all my kettles just for the control panel and other MISC parts it was pushing $2500.00

Here's a bunch of pictures I just took: http://www.dropbox.com/sc/bv7l82mch5frlzu/K3V74ZL_W9

Also included, but not listed above are the following:

Stainless Steel Hop Spider for 20g kettle
Monster Mill 3 w/Hardened Rollers
Components to motorize mill as per this build: https://www.homebrewtalk.com/f51/motorized-monster-mill-build-373083/ (motor, gear reducers, couplers, switch)

Above items were about $800 or so, included in the price of $5000.

I'd possibly be interested in all 3 boilermaker kettles and false bottom if parted out. Along with herms coil and heating elements.

Awesome set-up!! If I wasn't getting rid of some extra stuff myself, i'd probably bite

I've gotten a bunch of PMs questioning the numbers. Here's a link to my build spreadsheet, totaling about $7400 for everything:

https://www.dropbox.com/s/q8yqhbuy4ei5dig/BreweryEquipment-Cleaned.xlsx

Even though my initial estimate to put it together was < $5000, the stuff starts adding up, quickly. This should help clear up any confusion or thoughts that I was padding the pricing. My thought with the $5000 number is that it was a bit over 30% less than what I had in it, and didn't account for any of my time in sourcing the parts or building it.

Ryan

If you are willing to sell the hop Spider separate PM me the price or post it. Interested as I have the same setup and would like to take the pressure off the hop stopper for my IPAs. Thanks

PMed.

Did you PM me, because I didn't get a message. I will empty my box if that was the issue yhanks

Deposit received.

Really wish I were local because this is essentially the exact system I'm planning to build....

Is this gone?

Im Curios as well by the notes seems to be but if still around would be very interested

It was sold - I edited the first post to reflect this.

You can close/delete the thread in the thread tools tab