Lost my ebay temp control directions

I lost my directions on how to set the temp controller. I remember how to set the temp but not the variation in degrees. can anyone scan and post that section?

Press the up arrow once to show the current SET TEMP
Press the down arrow once to show the temperature DIFFERENCE VALUE

To enter PROGRAMMING MODE press and hold the S key for 3 seconds.

The display will change to F1 and a light will appear under the word Set on the controller.

Use the arrow keys to choose which function you would like to change. Press the S key to make your selection.

Programming Options:
F1 = SET TEMP
F2 = DIFFERENCE VALUE (variance from the set temp
F3 = COMPRESSOR DELAY (in minutes)
F4 = PROBE ERROR CORRECTION (positive or negative by 0.1 degree)

While holding the S key down, press/hold the arrow keys to adjust the value. When you have set the value you want release the S key and the arrow key.

If you press the arrow key without holding the S button down you will be able to make changes to another function if necessary.

Press the POWER BUTTON (above the S key) to save your changes.

Thanks!

Sure thing!