yet another hows my crush

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mb82

Well-Known Member
Joined
Apr 15, 2012
Messages
702
Reaction score
72
Location
Charlottesville
crush1_zps1b186c32.jpg

crush2_zps4ebabd36.jpg


I BIAB and I crushed this with my new corona mill. It looks ok to me but I figured I should ask the experts.
 
Since you said you are doing this BIAB I think you can go finer yet. If you rotate the crank without grain in the mill, do the plates grind against each other? Mine do. Sounds awful but I typically get 80% efficiency no sparge.
 
Since you said you are doing this BIAB I think you can go finer yet. If you rotate the crank without grain in the mill, do the plates grind against each other? Mine do. Sounds awful but I typically get 80% efficiency no sparge.
Yeah it sounds bad. But I backed of off from sounding like the lawnmower did when I was a kid right before the engine blew from a lack of oil :D

I will tighten it a little more and go with it.

Thanks everyone.
 
Back
Top