Steep and Mash

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hector

Well-Known Member
Joined
Jan 22, 2010
Messages
668
Reaction score
8
Location
Last Station
Hi there !

Why do you steep the specialty malt by Extract brewing just for 20-30 minutes , but by All-Grain brewing it would be in

the mash along with the base malt for 1 Hour ?!

Hector
 
steeping grains do not have starch that needs conversion, you are just getting color and flavor. as an aside after 30 min an all grain mash could also be fully converted but we go to 60min anyway to be sure.
 
as an aside after 30 min an all grain mash could also be fully converted but we go to 60min anyway to be sure.

Wouldn't that extra 30 minutes lead to extraction of extra and undesirable Tannins from the steeping grains ?!

Hector
 
By the way, according to BBR - mashing for up to 90 minutes seems to be a good idea if you mash at 150 F.

B
 
You start to get tannin extraction at around 185-190. It would even take 20-30 extra minutes at those temps before you started to get enough tannin extraction to be noticable in a 5 gallon batch, so you really have to work at it to ruin a beer via tannin extraction.
 
To extract the unwanted tannins out the pH has to be over 6.0. It doesn't matter what the temperature is (well hotter is worse). Many us us do decoctions where we boil a small portion of the mash, and we don't get tannins - because the pH is in the proper range.
 
Back
Top