Kegerator draft tower.

CornyKegs 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dave the Brewer

Dave the Brewer

Well-Known Member
Joined
Sep 8, 2007
Messages
254
Reaction score
6
Location
Nederland, TX
I'm building a tower for my soon to be kegerator, what is the standard bolt patten on the base? How far apart are the bolt holes from each other, and bolt hole size? I would like to drill the holes once in case one day I buy one. Anyone help is appreciated.

P.S. if you measure the distance from hole to hole measure from center to center please.;)
 
unfortunately they aren't all the same. I started with a single tap and when I went to a dual tap set up I had to re-drill my mounting holes for a larger diameter.

I would say buying the tower first would be good, or if you plan on buying from Micromatic, they will tell you the hole patern. www.micromatic.com

Linc
 

Similar threads

Yesfan
Komos/Kegland Kegerator Tower Question
Replies
1
Views
291
Broken Crow
Broken Crow
P
Kegerator leaking from inside the tower
Replies
11
Views
721
sibelman
sibelman
Raptor99
Upgrade Danby Kegerator to Dual Tap
Replies
11
Views
1K
govner1
govner1
rawlus
Illuminated beer medallions on your faucets or towers?
Replies
3
Views
952
day_trippr
day_trippr
Ashv1
Turning my smaller kettle into a malt pipe
Replies
15
Views
1K
IslandLizard
IslandLizard

Latest posts

Back
Top