My Weldless Build Using Strut

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A Milwaukee bandsaw is the best investment for any fabrication work. Just out of curiosity, why 3 kettles, why not get a 55 Gallons stainless barrel, a stand and jet burner. I made stirring system with a wheelchair motor a couple pillow blocks and a friend who is a fabricator. Attached is a pic of one for my 20 gallon/ 100 litre kettle.

I used triclamps on my stills, but since I use all silicone hose, I can run the supply line from kettle to the fermentor in a loop with the kettle boiling water and it pretty much ills everything after 20 min. T

I used an angle grinder to cut all mine and I wished I would have bought a bandsaw. My build looks like . . . I used an angle grinder to cut my strut. :ghostly:
 
Back
Top