b33rmug
Active Member
So I have been using a picnic tap to serve from a second corny for a long time. I was getting close to having a third keg ready to serve from. My birthday was last week so I asked for a couple perlick 525ss taps and a coupe tower shanks.
Thought I would share, I saw some threads when searching where people mentioned adding them, no real after pictures.
With the new shanks installed.
Finished.
I also decided to add a second regulator so I could serve 3 taps and run 2 different pressures (1 to carb, 2 to serve, or 3 to serve, etc.). I still have a high pressure gauge coming. I had left hand threads.
-Eric
Thought I would share, I saw some threads when searching where people mentioned adding them, no real after pictures.
With the new shanks installed.
Finished.
I also decided to add a second regulator so I could serve 3 taps and run 2 different pressures (1 to carb, 2 to serve, or 3 to serve, etc.). I still have a high pressure gauge coming. I had left hand threads.
-Eric