Replacing 2.5" Draft Tower with a 3"

Williams 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T

Thehopguy

Well-Known Member
Joined
Jun 8, 2011
Messages
527
Reaction score
13
Location
san diego
Is it possible to replace my Single Tap 2.5" Draft Tower with a 2 Tap 3" Draft Tower?

Got a kegerator recently and the tower is a 2.5" and the flange is 3.5"

Could I get the 3" Tower with a 4.5" Flange and just drill new mounting holes? The Towers diameter will be about a 1/2" bigger than the hole in the top of the kegerator but that shouldn't be a problem right??
 
I did that with my Kenmore keggerator. It was easy for me because the top is actually wood, so there was no fear of hitting any refrigerant lines while drilling the new mounting holes.
 
Ya the top of mine is wood also. Well if it worked for you I hope it'll work for me, so I think I'll go for it. Thanks
 
Cool, well im gonna give it a shot.

Birdman I ordered from you, two tap tower with perlicks upgrade and a keg. Can't wait!
 

Similar threads

P
Kegerator leaking from inside the tower
Replies
11
Views
721
sibelman
sibelman
rawlus
Illuminated beer medallions on your faucets or towers?
Replies
3
Views
952
day_trippr
day_trippr
Raptor99
Upgrade Danby Kegerator to Dual Tap
Replies
11
Views
1K
govner1
govner1
R
Question regarding cleaning tap and beer lines
Replies
14
Views
2K
alex pablate
alex pablate
WinterWarlock
Upgrading to larger diameter Dual Faucet Tower, Should I drill new holes in my Kegerator?
Replies
3
Views
1K
Broken Crow
Broken Crow
BrewSwag 300

Latest posts

Back
Top