Standard Propane - Brutus 10 type build

Quick question - Anyone know what type of regulator I will need for a brutus 10 style build?
Will this work: http://www.alliedkenco.com/fitting-inlet-acme-green-1.aspx
I'll be using a standard BBQ propane tank with 3 jet burners about 90K BTU each. Only two will ever be going at once & it will be automated by Honeywell gas valves. I've been able to find most everything through searches, but couldn't find anything specific about this before I got tired of looking & posted here. Any help would be appreciated. Thanks.

Your link appears to be to a fitting, not a regulator.

If you're going with low pressure Honeywell valves and three burners on a common rail you want a high volume propane regulator set for ~11" WC (roughly 0.4 psi)...

Cheers!

http://www.pplmotorhomes.com/parts/lp-gas/propane-regulator-rv.htm an intergal twin stage like this would be something to consider over a standard bbq single stage reg. I believe this model handles about 215 kbtu. The twin stage feature will reduce regulator wear and tear over the single stage and offer some extra protection for the $300ish worth of control valves downstream..

brewzur said:

http://www.pplmotorhomes.com/parts/lp-gas/propane-regulator-rv.htm an intergal twin stage like this would be something to consider over a standard bbq single stage reg. I believe this model handles about 215 kbtu. The twin stage feature will reduce regulator wear and tear over the single stage and offer some extra protection for the $300ish worth of control valves downstream..

Click to expand...

Thank to both of you! I appreciate the help.