Propane Manifold for Brew Stand Question

CornyKegs 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

DrewC

Active Member
Joined
Mar 5, 2009
Messages
27
Reaction score
0
I'm putting together my parts for my manifold. I was going to use my regulator off my SQ14 burner. My plan was to have that thread into a bushing that connects to the black pipe, then to a tee, to a valve, etc, etc.

My regulator hose has the orifice attached. Any problems with this?
 
DrewC said:
I'm putting together my parts for my manifold. I was going to use my regulator off my SQ14 burner. My plan was to have that thread into a bushing that connects to the black pipe, then to a tee, to a valve, etc, etc.

My regulator hose has the orifice attached. Any problems with this?
Click to expand...

Yes, that's going to be a problem. The orifice should be in its proper location in the venturi bell. Having it upstream isn't going to produce a proper burn...

Cheers!
 
I will still have another orifice screwed into each burner. I guess I'm trying to save some cash and reuse the regulator I have.
 

Similar threads

humor4fun
Multi-tank Manifold setup?
Replies
2
Views
381
IslandLizard
IslandLizard
VikeMan
Poor Man's CO2 Manifold?
Replies
17
Views
1K
Broken Crow
Broken Crow
Nagorg
Single Primary with Distribution Manifold or Multiple Secondary Regulators
Replies
16
Views
998
day_trippr
day_trippr
A1sportsdad
Is this considered a Leak
2
Replies
45
Views
3K
A1sportsdad
A1sportsdad
R
For Sale (Indianapolis, IN) FOR SALE....custom built brew stand and ALL of the equipment
Replies
0
Views
620
retiringbrewer
R

Latest posts

Back
Top