Plate chiller (40 plate) with 1/2" Cam-lock QD's

Only about 6 weeks old and used three times only. Comes with x4 1/2" stainless steel PFD cam-lock "F" adapters (male) on each fitting.

$100 shipped to main 48 USA.



Copper brazed 40 plate 316L Stainless Steel Heat exchanger with the following specifications:

Technical Specifications:
Name Plate Heat Exchanger
Model B3-12B-40
Dimensions 71/2" L x 27/8" W x 4" D
Unit Heat Exchange Area 18.6 in2
Design Max Flow 17.6 gal/min
Material 316L Stainless Steel
Weld Material Copper with a purity of 99.9%
Thickness of the Sheet .0118 in.
Liquid Hold-up 18 mL / each passage
Design pressure 1.0 MPa or 145 psi
Testing pressure 2.0 MPa or 290 psi
Design temperature -195 ºC to 220 ºC, -319 ºF to 428 ºF
Fittings

1/2" NPT Pipe with internal threading(see photo, not drawing)
Heat Transferred 1-5KW
Flow Paths Two
Application Hanging boilers, water heaters, low temperature experiment equipment, small-sized refrigeration equipment, etc..
The diagonal layout of the sheets can make a full use of the dead angles of the Plate Heat Exchanger. Put on its side, the exchanger can still exert its functions.

Sending you a pm.