Does it Exist? 3/8" Female Flare Elbow for Banjo Burner

We're trying to find a way to go from the 3/8" Male Flare Banjo Orifice to a 90 elbow so we can connect our 1/2" flex gas connector.

I've looked all over - does anything like this exist? All of the options I can find add several pieces together to go from the orifice to a 90.

I've searched the boards - and I know I've seen folks using 90* Elbows coming off of their burners. What is everyone using to do this?

Thanks!

Is this what you need? http://www.tejassmokers.com/images/f90cast.jpg, they also have them in 1/4" pipe threads for burner connection.

Sigh. I found 2.
Brass $8 http://www.suremarineservice.com/FIT-461.aspx
SS $35 http://www.grainger.com/Grainger/items/1LNT3?Pid=search

I ended up at Car Quest, and they made me a hydraulic line with 1/2" MPT on one end to go into the valve and a 90 deg 3/8" flare swivel on the other end. They can look in book and one of the hose materials is safe for LPG and Natural Gas. I ended up paying $20 / line (they quoted me a price before they looked up the cost of the fittings and honored it). I think the fittings were $20 for the 90 3/8" and $10 for the 1/2". Considering I had about $25 / line from HD in the 12" 1/2" line(Lowes doesn't sell 12" water heater lines), various fittings etc, and the $8 for the above link I was willing to pay $35/$40 for the Car Quest lines(so I came out golden). I think it looks must more clean than the flex yellow lines they sell @ HD.

John

Yup - found some like the ones you mentioned jkeeton -

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390019723704&ssPageName=STRK:MEWNX:IT

Looks like he increased the price since I ordered - but they work great. They came in the mail today and are just what I was looking for. Used these with 3/8" Female Flare to 1/2" Male Flare reducer so I can connect the flex line. Should work out perfect.

Can anyone point me in the direction of the above fitting? In the same situation and having no luck finding the 3/8" female flare to 1/2" male flare.

Thanks

They aren't the easiest to find. The one we found was from [FONT=&quot]john102561 [/FONT] user on eBay. He sells/sold mostly HVAC / refrigeration parts so you might check those areas or call up some shops nearby. The description for the part was:

[FONT=&quot]Brass Swivel Elbow 3/8" Male x Female Swivel Flare Nut
Item# 390019723704

$5.85 each

Good luck!
[/FONT]

mplutodh1 said:

They aren't the easiest to find. The one we found was from [FONT=&quot]john102561 [/FONT] user on eBay. He sells/sold mostly HVAC / refrigeration parts so you might check those areas or call up some shops nearby. The description for the part was:

[FONT=&quot]Brass Swivel Elbow 3/8" Male x Female Swivel Flare Nut
Item# 390019723704

$5.85 each

Good luck!
[/FONT]

Click to expand...

I'm finding just that, they are not easy to find.

They're in the same isle as the pixie dust and unicorn food at the hardware store.

Paulasaurus said:

Can anyone point me in the direction of the above fitting?

Click to expand...

You need these two parts

http://www.suremarineservice.com/FIT-461.aspx
3/8" Female Swivel Flare (SAE) x 3/8" Male Flare (SAE) Brass Elbow


+

http://www.suremarineservice.com/FIT-447.aspx
3/8" Female Flare (SAE) x 1/2" Male Flare (SAE) Brass Adapter