Any Sabco Brew Magic Users Out There?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Appreciate it but there is literally no information on that site.looking for answers please help
 
I built my own RIMS that is similar to the sabco. I usually mash in at. 1.5. lbs/gallon. It seems to flow better.
 
I built my own RIMS that is similar to the sabco. I usually mash in at. 1.5. lbs/gallon. It seems to flow better.

WOW, 1.5LBS/GAL is 2.6qt/lb seems to be a pretty thin mash.

I use a 1.3qt/lb ratio for mashing normal grain loads

I use a 1.15qt/lb ratio when I max out my grain load @ 35lbs

As far as sparging I fill the HLT (15gal) and sparge till I get my desired boil volume making sure to check the gravity and ph of the existing wort.

Stop collecting wort when gravity is 1.010 or ph is above 6
 
Long Time Brew Magic Owner here, glad to see another Brewmagic forum, so sad that all of the old posts are not accessible, there was a wealth of knowledge there! I just Registered today, be glad to offer any advice I can, miss the old days when the old forum was Rocking!!

Eastside
 
Back
Top