Electric brewery control panel parts

These parts were never used. First I was going to build a RIMS system, then a HERMS, so I've got a lot of random parts

From ElectDirect (quantities in parenthesis):

PB-BVL74240V 240V LED red light (1)

PB-BVL04 HEAD, RED, HIGH CONTRAST FOR USE WITH NEON OR LEDs (1)

PB-BC4 MUSHROOM HEAD SPRING RETURN ACTUATOR METAL RED (1)

PB-BZ105 COLLAR & 1 NO/1 NC CONTACT BLOCK (1)

PB-PY9330 ROUND LEGEND PLATE, 60MM DIAMETER, PLASTIC, EMERGENCY STOP (1)

765000 FACE PLATE, ON-OFF TYPE, 1 PC (3)

765046 2-SCREWS, ON/OFF, CHROME HANDLE, MEDIUM DUTY (3)

765001 RUBBER BOOTS (3)

31110 1 POLE DIN RAIL FUSEHOLDER FOR CYLINDRICAL FUSES, 32A (2)

31112 2 POLE DIN RAIL FUSEHOLDER (1)

SPG50-3875 SPIRO CONNECTORS 1/2" NPT .38-.75 BLACK (2)

ADB142/01 POWER DISTRIBUTION BLOCK , LINE 2/0-14AWG 1 OPENING, LOAD 4-14AWG 4OPENING, 1POLE (3)

from Auber:

D4840 40a ssr (1)
RS1A40D25 25A SSR (1)
HS40ET External Mount Heat sink (1)
HS25 Heat sink (1)
CN-PBC402-120V Contactor, 2 pole 40 A, 120V Coil (1)

I also have a Camco 02923 4500W element, and a bunch of 120v lights from radio shack, as well as some spools of wire.

I think I've spent about $200 on everything. I'd like to sell as much together as possible, so if I could get $100 plus shipping for everything I'd be thrilled.

I you still have this, I would do 100 shipped

PM sent

And replied

If this falls through I would in interested in the 40A SSR, HS40ET External Mount Heat sink, and contactor

any chance the 40A SSR, HS40ET External Mount Heat sink, and contactor is still for sale?