co2 2 or 3 way distribution splitter

Brewer's Friend 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

cryptonic84

Well-Known Member
Joined
Oct 13, 2009
Messages
73
Reaction score
0
Location
Groton, CT
Wondering if anyone has ever built/fab'd/made/etc. a distributer to split off co2 lines off of the co2 regulator or wherever to run multilple kegs off of 1 tank. i am sure there is a way because it seems like lowes/home depot has all the necessary components but i am not the problem solving type.
 
They have the two way splitters for CO2, only a couple of bucks each. The only downside is you have to keep the same pressure on both kegs.
 
Harbor Freight sells a solid brass coupler cross for $2.99 (item 93649) that has four 1/4" female NPT ports and a 7 piece hose repair kit (item 94501) for 6.99 that has brass 1/4 NPT fittings with 1/4" barbs with stainless hose clamps. Buy 2 of the hose repair kits and all your fittings are taken care of to run 3 kegs. Buy a 1/4" NPT plug at Lowes or HD for the other port if you only want to run 2 kegs.
 

Similar threads

iandanielursino
Anyone ever thought of trying to use CO2 from the same batch to bottle that batch?
Replies
13
Views
552
iandanielursino
iandanielursino
Nagorg
Does a CO2 Leak Cause a Decrease in Humidity?
Replies
2
Views
223
Nagorg
Nagorg
humor4fun
Multi-tank Manifold setup?
Replies
2
Views
381
IslandLizard
IslandLizard
Nagorg
Single Primary with Distribution Manifold or Multiple Secondary Regulators
Replies
16
Views
999
day_trippr
day_trippr
R
5 pound CO2 tank
Replies
36
Views
2K
Buelos75
Buelos75

Latest posts

Back
Top