EricK The Red
Well-Known Member
I have my eye on a 4.4 cubic foot refrigerator, would these dimensions allow for two corney kegs?
(L x W x H): 21.5 x 20.75 x 33.0
(L x W x H): 21.5 x 20.75 x 33.0
Shopping for a mini-frige
- Thread starter EricK The Red
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
You need minimum of around 26" interior height to allow for corny and bal lock connectors. A corny is about 9" in diameter as well.
Doesn't look like there's a freezer which is a good thing.
IF you buy the popular Sanyo at best buy, there are lots of DIY's around on drilling the top for a tower, etc...Not sure what brand you're looking at, but adding a tower should be a consideration.
Doesn't look like there's a freezer which is a good thing.
IF you buy the popular Sanyo at best buy, there are lots of DIY's around on drilling the top for a tower, etc...Not sure what brand you're looking at, but adding a tower should be a consideration.
OP
OP
EricK The Red
Well-Known Member
BierMuncher said:
Which model Sanyo? I see three at Bestbuy's site.
Thanks.
amishland
Well-Known Member
every one gets the 4912
Yep...that's the one. Couldn't remember the model.amishland said:
Do a search for Sanyo 4912 and the word kegerator and you'll find a ton of how-to's and illustrations.
Drilling a hole dead-center in the top is the safe spot for a tower...to avoid any coolant lines.
Similar threads
