My first homebrew setup

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jared311

Well-Known Member
Joined
Feb 28, 2008
Messages
500
Reaction score
2
Location
Columbia, MD
This is my current setup:

Customized 10 Gallon Cooler Mash Tun
- Removed the plastic spigot
- Inserted a stainless steel ball valve
- Attached a stainless steel mesh filter on the ball valve inside the mash tun

Customized 7.5 Gallon Stainless Steel Brew Pot
- Drilled hole towards base and inserted a stainless steel ball valve.
- Attached a stainless steel mesh filter on the ball valve inside the brew pot

7.5 Gallon Aluminum Water Boiling Pot

Propane Boiler

Custom Built Counter-Flow Wort Chiller
- Built using 3/8" soft copper tubing, 5/8" durable rubber hosing, and copper pipe fittings
- Cools 120F wort to 65F wort in less then 10 minutes with the use of around 5 gallons of water

Custom Built 3 Tier Racks
- Nothing fancy
- Uses gravity to get the job done

Everything connects together using stainless steel hoses such that the wort only comes in contact with copper or stainless steel components.

I love this setup, it makes brewing extremely easy. Just start at the top and work your way down.

file.php


file.php
 
Back
Top