tiny rust spots after first boil on new ss keggle.

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

slomo

Supporting Member
HBT Supporter
Joined
Jan 14, 2009
Messages
486
Reaction score
22
Location
Brownsburg, IN
Last night I did a trial run with my new 15.5 gallon keggle, march pump, and plate chiller. Everything worked like a charm. The pump pumped, and the plate chiller brought 5 gallons of boiling water down to 65 degrees in 5 minutes.:rockin: as I was cleaning up I noticed that on the inside of my keggle on the very bottom there were tiny dark spots, which looked liked rust spots. Has anyone had this happen before, and will I still be able to us my keggle?

TIA:mug:
 
Pick up some Barkeepers Friend and give it a scrub with a scotch brite pad, that will clean and re-passivate the stainless for you.
 
Back
Top