Love TSS2 Programming woes..

I have read and read how to program this thing.. My Chest freezer converted into Kezzer build turned out.. I have the TSS2 Probe just using the SP1.. I dont want to use the SP2 just yet.. I wired it up, and turned it on, the relay just doesnt kick the compressor off.. No clue why..

Will someone please give the correct settings for just using SP1 as cooling for the keezer..

Settings are
SP1 34
SP2 32 (not in use)
RO IND
R1 3.0
R2 3.0
R3 3.0
R8 ON1
C0 3.0
C1 DIR
C2 DIR
C3 OPEN
C4 CLSD
P3 YES
P4 SD1
P5 1
H1 YES

mine are:
sp1 38
sp2 0.0
ro ind
r1 4.0
r2 3.1
r3 3.0
r4 24
r6 38
ao .5
a1 6.0
a3 6.0
a5 0.0
a7 ano
co 1.5
p5 1

this allows me to adjust temperature between 24 and 38, wasn't sure which differential was being used and also turns off probe 2 to get rid of error message

others are at factory settings, and has worked well for over a year now

Looks to me from your diagram that your probe is installed incorrectly. leads should be in 1/3 not 1/2 as you drew out. see picture for details.

MooMooBrew said:

Looks to me from your diagram that your probe is installed incorrectly. leads should be in 1/3 not 1/2 as you drew out. see picture for details.

Click to expand...

I am Sorry, it is at 1/3.. Diagram is wrong there, but everything else is correct..

Ever figure this out?

From what I figure.. The relay has to be broken, i bought a digital rancho to solve it..

The only other thing that I could see is maybe the jumper on the outlet wasn't cut? It looks like it is in your drawing though.

I use the neutral area mode on my ferm cabinet, it works great. Try reprogramming it using the specs here. Hopefully it helps.