Is MicroMatic beer line really better than B3?????

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

B-Dub

Well-Known Member
Joined
Sep 5, 2007
Messages
557
Reaction score
13
Location
Central Coast
I have a 4 keg tapper running with B3 line for both beer and CO2.

The lines are "stiff" when cold, but not so much so they can not be moved.

Is the MM line really that much better I should buy all new line? I am moving the taps so that would be the time to replace the line if I am ever going to. The beer line is 3/16" and the CO2 is 5/8".



What are your thoughts??
 
i have the MM lines but i havent had to clean or remove them yet. There deffinitly stuborn. i went with the 1/4" but i know the 3/16 must be very tight
 
Anyone tried both and find one better than the other?? Not specifically removing the lines, but general use.
 
I use the MM beer line, only because they have a warehouse right down the street, so I can get it an increadible price.

I cant speak for the other beer lines, but my MM beer lines do get cold and a little stiff, but they are not unmanagable.
 
Back
Top