Brewme
Well-Known Member
Here are some pictures of my nearly completed brew stand. I got the gas lines plumbed last night and fired it up. Each burner is 175k BTU's. It was great. I am still needing to add the pump and diamond plating as a shelf on the bottom. I also have a fighter plane style toggle switch for the pump that I will mount with a piece of diamond plating in the upper corner.
I want to thank Bobby and The Bitter Brewer for their help and design ideas. Without those two guys, it would have been much more difficult to get this beast done. I used 1.5" square tubing and the thing is built like a tank.
EDIT: I can't get the pictures to post. They are in my gallery and you can get there by clicking these links. Does anyone know why the image button doesn't work?
https://cdn.homebrewtalk.com/gallery/showphoto.php?photo=24594&limit=recent
https://cdn.homebrewtalk.com/gallery/showphoto.php?photo=24595&limit=recent
I want to thank Bobby and The Bitter Brewer for their help and design ideas. Without those two guys, it would have been much more difficult to get this beast done. I used 1.5" square tubing and the thing is built like a tank.
EDIT: I can't get the pictures to post. They are in my gallery and you can get there by clicking these links. Does anyone know why the image button doesn't work?
https://cdn.homebrewtalk.com/gallery/showphoto.php?photo=24594&limit=recent
https://cdn.homebrewtalk.com/gallery/showphoto.php?photo=24595&limit=recent