perlick 425ss parts?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jspence1

Well-Known Member
Joined
Jul 1, 2008
Messages
1,035
Reaction score
10
Location
Hamilton, Ontario
I'm in need of replacing the seals in my taps. Anyone know oring sizes? I'd like to get replacements ASAP and nobody has kits locally
 
Call Perlick. They are pretty good at standing behind their products and making sure you can get parts. I have 4 of their new SS taps. They all leaked. There was a design issue and they changed some of the parts as a result. They sent me out new rebuild kits for mine.
 
Some info in this thread: https://www.homebrewtalk.com/f35/perlick-o-rings-222382/
I think that should cover #5 and #8 below. The other stuff you may not need to replace.

The plastic/rubber parts include two different sizes of o-rings, two different sizes of rubber washers, and a pair of bearing cups. I'm not sure of the sizes and Foxx Equipment catalog doesn't list the sizes. If it helps, here are Foxx's part numbers and a diagram.

3 12G09-131 Washer (rubber)
4 12G09-185 Bearing Cup
5 12G09-186 O-ring
7 12B03-173 Washer, faucet
8 15C07-104 O-ring, plunger

p425.png
 
Call Perlick. They are pretty good at standing behind their products and making sure you can get parts. I have 4 of their new SS taps. They all leaked. There was a design issue and they changed some of the parts as a result. They sent me out new rebuild kits for mine.

Just out of interest - and for the record in case someone lands on this thread in the future - what did the "rebuild kits" consist of?

Cheers!
 
Just out of interest - and for the record in case someone lands on this thread in the future - what did the "rebuild kits" consist of?

Cheers!

Interestingly the "official" kits don't include o-rings.

I just noticed that Perlick sells all the parts themselves, including the kits, for a reasonable price.

http://www.perlick.com/store/webcatalog2.php?catno=1&sectno=1&grpno=8

Basically the "kits" include all the parts marked "9 Kit" in the picture I posted above.


Kegworks sells a kit of all the plastic/rubber parts for $5 http://www.kegworks.com/perlick-425-draft-faucet-repair-kit-1360-p175514
 

Latest posts

Back
Top