HughBrooks
Well-Known Member
I just made my own wort chiller out of 3/8'' copper tubing. I went the cheap route and bought only 20 feet. The home depot had pre-sized lengths in a spool. I made it for less than 20 bucks. I do partial boils so I only need to cool at most 3 gallons at a time. My question is.... I cleaned it by soaking it in white vinager/ water solution for 30 min then soaked it in PBW for another 30 min. Will that be clean enough before I use it for the first time? Do not want to contaminate anything with any oils or anything like that. Thanks for any advise.