GR Style Regulator Parts Needed

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TRainH2o

Well-Known Member
Joined
Aug 13, 2009
Messages
430
Reaction score
7
Location
North Georgia
I have an older GR style regulator that leaks. It is a North American Dispense Systems model 70012. NADS, now Taprite, says that they no longer have the repair kit. Anyone know where to check. Keg Connection comes to mind. Other suggestions? Thanks.
 
Thanks for the reply. I was told that it uses the same parts as a Micromatic regulator. I found one on Mark Powers.com. Thanks again.
 
I know this is an older post, but if anyone knows which micromatic regulator repair kit will work on the NADs 70012 please let me know. I'm trying to repair one. Thanks.
 
Just an FYI if you have this older model NADS 70012 regulator that needs repaired and you want to take a chance on fixing it. NADS was bought by Taprite and there is no longer parts for any NADS models. However, the Micromatic Economy Series Secondary Regulator Repair Kit 8000-15 Is almost an exact match. The Economy Series Regulator Seat Capsule Assy 8402 is a little off, but I got it to fit. I had to tighten it down firmly. Also, don't forget a 84010 Seat Spring. It's also slightly smaller, but worked. http://www.micromatic.com/draft-keg-beer/regulators-pid-8011.html

I actually have two of these NADS Regulators and this Micromatic kit worked on one and not the other. Your odds are 50/50.

The older model Taprite repair kit looks like it could work also, but I didn't try it. The Diaphragm and Regulator Pressure Plate are one piece, but appear like they "might" work. http://www.chicompany.net/index.php...rch_in_description=1&keyword=regulator+repair

Also, the Draught Technologies repair kit looks like it might be an exact match, but again I haven't tried it. http://rapidswholesale.com/beer-sup...aught-technologies-regulator-repair-pack.html

These are very old regulators and you might just want to buy a new one.
 
Back
Top