Regulator extensions

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You can connect the two sets by splitting the incoming line with a tee or with a short bridge pipe.
 
To answer your original question. Yes, you should be able to just add a nipple and connect more regulators.

Just keep in mind that these are all low pressure secondary regulators, so you'll still need a primary at your tank to drop the 2000psi of the tank down to a usable pressure for these. Guessing you already knew that though?
 
Back
Top