Project is well on its way.... some of you may have read about the 20 gallon all stainless AG system I'm putting together. Here's the beginning stages of my stand (the only thing not stainless). Picked up all this 2" square tube from the drop tent at the steel yard. $0.75/lb, 100 lbs, cost me $75.
Its going to be a single pump system. Elevated sanke keg for HLT, and the MT and kettle which are both 100 quart stainless pots. A 4th vessle, a sanke cut in half, will reside below the HLT and be dedicated to the HERMS coil for better control of both HERMs recirculation loop, and my sparge water temperatures. I'm getting excited!!!!
Its going to be a single pump system. Elevated sanke keg for HLT, and the MT and kettle which are both 100 quart stainless pots. A 4th vessle, a sanke cut in half, will reside below the HLT and be dedicated to the HERMS coil for better control of both HERMs recirculation loop, and my sparge water temperatures. I'm getting excited!!!!