Tap Setup?

Yakima 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
daveooph131

daveooph131

Well-Known Member
Joined
Mar 25, 2009
Messages
1,123
Reaction score
34
Location
Dallas, TX
If you're doing a 3 tap kegerator setup can you run it off the same 5# tank?

For example, right now I've got two taps, w/ plans to add one, one 5# tank and a duel regulator. Could you basically just keep swapping out which keg is on the gas depending on what you are in the mood for?
 
My understanding, is yes.
but...you need to make sure you have the proper amount of pressure in the keg before you take it off the c02, so the beer wont go flat.i think if you do that you'll be ok ..
 
I have a 3 tap setup on my kegerator and a 3 way gas manifold that runs off of my 5# tank.

I think I picked my splitter at Kegconnection - it works great. I close 2 valves when I am force carbing, drop the pressure to serving and can serve 3 beers at once with no issues.
-Me
 
I was looking at the one from morebeer.com Starts with 3, but can add on more as needed. Guess I only knew because i was looking into building a 3-tap kegerator. Good luck!
 

Similar threads

N
Buying used - what to look out for?
Replies
13
Views
945
whoaru99
W
iandanielursino
Anyone ever thought of trying to use CO2 from the same batch to bottle that batch?
Replies
13
Views
544
iandanielursino
iandanielursino
U
Checklist for kegerator setup
2
Replies
41
Views
3K
uptheirons
U
P
Kegerator / regulator issue? - beer not flowing properly and I'm out of ideas
Replies
30
Views
1K
day_trippr
day_trippr
Y
CO2 Tank to Regulator Extension?
Replies
15
Views
2K
YeastFarmer
Y
InkBird 300

Latest posts

Back
Top