First Step in HERMS Conversion...Thanks Yuri and all others

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxbing

Well-Known Member
Joined
Nov 26, 2008
Messages
83
Reaction score
2
I just took the first step in upgrading to a HERMS System

I added a sight glass/Temp Prob port, electric heating element, and Heat exchanger coil to my HLT. Next comes digital Temp Controllers. Sorry for the poor Picture quality

Here I am just recirculating through the Coil back into the HTL to test for leaks…None yet

5495_1142110565610_1612852333_337222_475635_n.jpg


This is the Sight glass. The “T” on the end will be where the temp probe goes.

5495_1142102245402_1612852333_337182_7872752_n.jpg


The is the Coil that is attached to the Cooler lid.

n1612852333_337183_4853284.jpg
 
Yes, i will be. But I did not order enough. Placing order with McMaster right now ;-)

By The Way Thanks for the Inspiration. This rig will look very familiar to you.
 
Yes, i will be. But I did not order enough. Placing order with McMaster right now ;-)

By The Way Thanks for the Inspiration. This rig will look very familiar to you.

Oddly familiar, yes.
 
Back
Top