Heating element hole size

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

shyanny

Active Member
Joined
Aug 3, 2012
Messages
35
Reaction score
7
I just wanted to clarify that the hole size for an electric heating element is 1 1/4 inches. The correct hole punch size for this element is the greenlee 1 1/4 inch radio chasis hole punch. The 1 1/4 inch conduit punch is too big. Ask me how I know.
 
The 1" conduit punch works fine if you can't find a 1-1/4" chassis punch - it makes the hole 1-3/16" - 1/16" larger than the 1-1/4" punch.
 

Similar threads

A
New K-RIMS System question
Replies
10
Views
678
Genuine
Genuine
Nick Poggetti
Heating Element Scorching - Long boils w/ High OG Wort
Replies
25
Views
1K
Nick Poggetti
Nick Poggetti
Zrloth
DIY small batch all in one system
Replies
11
Views
3K
youngdh
Y
Dland
Reminder, check and tighten contacts on cords
Replies
1
Views
240
Broken Crow
Broken Crow
M
Removable heating element
Replies
25
Views
2K
Broken Crow
Broken Crow
CornyKegs 300

Latest posts

Back
Top