New to me copper tubing...

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Grimsawyer

Well-Known Member
Joined
Mar 28, 2006
Messages
877
Reaction score
10
Location
Salem, OR
Got back from the scrap yard about 4 hours ago, been playing with my new keg, chattin with the honey bunny and RDWAHAHB. I got about 50' of 1/2" soft copper tubing. I'm thinking I want to use it for various brewing applications, some where the wort will be on the outside some where the wort will be on the inside. What are some of the more aggressive ways of cleaning it out that I can do in my kitchen? It looks like it hasn't been used but you can never tell. I just want to make sure anything is out. 50' of it was only 8 bucks, couldn't pass it up. If nothing else I'll use it for an Immersion wort chilller or 2.
 
Sounds like a prime candidate for a big IC. It should be about the right size for keggle use. Just coil it up, put fittings on the end, and cool away.
 
Back
Top