quick connects

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LKHA

Well-Known Member
Joined
Oct 29, 2009
Messages
195
Reaction score
2
Location
Maynard
where to place them? male on tank or hose? does the female seal and not leak? thanks
 
where to place them? male on tank or hose? does the female seal and not leak? thanks

Some of the quick disconnect may specify flow direction. Specially if you are using the shut-off valve kind. I am using the quick disconnects from McMaster with silicone seals for a higher temp rating and no shut-off valve. I choose the male on tank and female on hose because of economics. The female quick connectors are a lot more expensive :)!

http://www.mcmaster.com/#6739k68/=558eu6

For more details, you may want to post your question to the "Zen Master" Bobby_M. I followed his recommendations on the Q. disconnects.

Cheers!!! :tank:
 
Back
Top