pressure to feed secondary regulators?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I use 30 psi and I split it off of the main reg. One side goes to the secondary bank and the other is an accessory port for purging vessels and hitting my carbonator caps outside of the kegger.
 
I use 30 psi and I split it off of the main reg. One side goes to the secondary bank and the other is an accessory port for purging vessels and hitting my carbonator caps outside of the kegger.
Same setup, even the carbonator caps for keeping soda carbed. :)

You can also use that 30psi line to ensure a good seal on a newly filled keg.
 
Back
Top