Burners-Regulators-etc

Seems there's lots of these threads lately so feel free to move along but I just wanted to get some reassurance that my friend and I won't blow ourselves up with this setup. In between the lp hose and burners will be a 1/2" steel pipe manifold with shutoffs to each burner and flexi gas pipe to each burner. Any specific fitting needed to go from the flexi gas pipe to burner? Thanks all.

Regulator- http://www.agrisupply.com/high-pressure-adjustable-regulator-valve/p/64484/cn/5400001/

LP Hose- http://www.agrisupply.com/lp-gas-hose-assembly-/p/36108/cn/5400001/

Burners(3)- http://www.agrisupply.com/bg-high-pressure-cast-iron-burner-/p/64494/cn/5400001/

I approve of your burner choice - when are you going to build your stands?

Yes,when are we going to build our stands? :rockin:

That pile of steel isn't going to weld itself is it. January or February!

i dont see the orifice attached to the burner in that picture. make sure it comes with the propane one. it probably will, but i would double check.

Paulasaurus - $29 seems to be a great price on the banjo burner.

Does anyone have experience with this one? Does it compare to Bayou's Banjo burner?

jonp9576 said:

i dont see the orifice attached to the burner in that picture. make sure it comes with the propane one. it probably will, but i would double check.

Click to expand...

Thanks, i'll check into that. Otherwise probably another part I can get from agri supply.

jonp9576 said:

i dont see the orifice attached to the burner in that picture. make sure it comes with the propane one. it probably will, but i would double check.

Click to expand...

FYI, I checked on that recently and was told by the AgriSupply people that the burner does come equipped with an orifice and the air damper plate.

Catt22 said:

FYI, I checked on that recently and was told by the AgriSupply people that the burner does come equipped with an orifice and the air damper plate.

Click to expand...

Thank you Catt22!

in that case, i might get one or 2 myself