Cooling beerlines,.. is this big enough ?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yes it is a reservoir and a pump,...
It should be placed inside the refrigerator, where the reservoir will be cooled. The question is if 500ml is enough, or if I need a larger reservoir,...

cheers,
 
I'm no cooling engineer but it doesn't sound anywhere like enough. I'd think You'd need a lager capacity and a flash cooler. The surface are of a cpu is tiny compared to the surface area of your beer lines.
 
It is big enough,...

However acrylic is a very poor heat conductor, so there is temperature difference between the refrigerator and the beerlines of 5 degrees Celsius.
If I add my immersion chiller to the loop inside the refrigerator, there is only a 2 degrees temperature difference.

Instead I will try this to keep the setup as small as possible:
http://www.alphacool.com/shop/Radiators/Radiators/Alphacool-NexXxoS-Pro-I-Rev-2--4635.html

I will report back later,....

cheers,
walther
 
Back
Top