What do you do eith the spare parts?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Zimbigneu

Member
Joined
Nov 2, 2009
Messages
15
Reaction score
0
Location
R.I.
Almost done with my herms setup and I kept pushing the tops and tubes from the keggles from place to place. Finally I decided to build something out of one. Here is what I came up with. Bought a lamp kit from home depot for $10, and viola I now have a lamp for my workshop. just needs to be cleaned up a little.
Next one I'm going to make the lid into the reflector for the bulb and have a ceiling mounted version. Then possibly incorporate the 3rd one into the brew stand for late night brewing.

image-3230655835.jpg
 
I'm not sure how sturdy that setup is, but we've done something similar over here. Had some huge disk brakes, screwed a pipe in there about waist high, and mounted a small vice on top. Doesn't work for anything huge, but a movable vice has been pretty handy.
 
Back
Top