- Joined
- Nov 14, 2008
- Messages
- 259
- Reaction score
- 0
I can't get my love TS2 into heating mode. Are there some models that don't have that capability?
Love TS2
- Thread starter Beer_Maker
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
OP
OP
- Joined
- Nov 14, 2008
- Messages
- 259
- Reaction score
- 0
Here is a photo of the label.
You will want to check the service manual, but I believe that your controller will only control one output. http://www.dwyer-inst.com/PDF_files/TS2_iom.pdf
The TSS2 has dual temp control options (see service manual). http://www.dwyer-inst.com/PDF_files/TSS2_iom.pdf
To double check this info, you can email their tech department. [email protected] They are very helpful and quick to respond.
The TSS2 has dual temp control options (see service manual). http://www.dwyer-inst.com/PDF_files/TSS2_iom.pdf
To double check this info, you can email their tech department. [email protected] They are very helpful and quick to respond.
OP
OP
- Joined
- Nov 14, 2008
- Messages
- 259
- Reaction score
- 0
I figured it out. The 8 seconds that the manual tells you to hold the set button is more like 15. Got it set up and controlling a heat lamp now.
slakwhere
Well-Known Member
to be clear, you switched from cooling mode to heating mode... you aren't running 2 devices at the same time, right?
OP
OP
- Joined
- Nov 14, 2008
- Messages
- 259
- Reaction score
- 0
That is correct. Just a heat lamp for right now. The TS2 can only do one at a time. Luckily my basement is sitting right about 51 degrees, so a small clip on light fixture in an insulated box is all I need to keep it right at about 65 degrees.
Similar threads
