Which wiring diag is correct for Control Products TC-9102D-HV

SSBrew - 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

davinci73

New Member
Joined
Feb 14, 2013
Messages
2
Reaction score
0
Location
Vancouver
Hi all. new to his site. been reading a lot lately.

Anyways i'm building a fermenting chamber and I've read forums and got confused on which is correct wiring. on their webpage it shows 2 Wiring configurations. Which one is correct?

Wiring Config #1

Or

Wiring Config #2

Thanks in advance for any help!
 
Definately #1. Like Passedpawn said, #2 is bad practice, and here's why. If you break the neutral (white wire), the power will go off to the device (outlet), BUT, there will still be a hot wire that is not broken. If somehow the device (keezer) contacts a ground, the device is HOT again.

If you break the hot (black) wire, no such risk exists.
 

Similar threads

Sean_SA
Is the Inkbird ITC 106VH right for my system?
Replies
4
Views
2K
Sean_SA
Sean_SA
sensei247
Review my wiring diagram? (BruControl fermentation automation)
Replies
12
Views
2K
Brumateur
Brumateur
OkieNotFromMuskogee
A Brewpi Remix Build
2
Replies
52
Views
10K
bloombrews
bloombrews
SalParadise
Control Panel Wiring Check
Replies
21
Views
2K
SalParadise
SalParadise
GuldTuborg
Feasibility of 240v brewing in my situation
Replies
15
Views
1K
GuldTuborg
GuldTuborg
Williams Brewing 300

Latest posts

Back
Top