• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

some stainless parts, washers, O rings, etc...

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jayjaytuner

Well-Known Member
Joined
Aug 17, 2012
Messages
84
Reaction score
6
Location
geneva
Have some parts that i no longer need...

Picture 1 on left paper:
Package contains 10
mcmaster-carr part# A370-881-60
stainless steel shim
.062" thick, 7/8" ID, 1-3/8" OD
---SOLD

In the white baggie:
package contains 5
Mcmaster-carr part# A370-883-60
stainless steel shim
.062" thick, 1-1/8" ID, 1-58" OD
---SOLD

2 -Hex Reducing bushings
304 stainless threaded pipe fitting
1/2" male x 1/4" female

Right paper:
package of 25 silicone O-ring dash no: 211 ---SOLD

package of 25 silicone #210 o-rings ---SOLD

Picture 2 left paper
9 pipe nipples 1/2" npt, 7 are 1", 2 are 1-1/4" (stainless) SOLD 4, 5 LEFT
4 stainless 1/2" locknuts ---SOLD
1 half inch Compression x 1/2" NPT threaded fitting ---SOLD
1/2" stainless ball valve 3 piece ----SOLD
22mm, no key switch --SOLD
316 stainless elbow 1/2 female to 1/2" male ---SOLD

Right paper:
1/2" type D coupler ----SOLD
1/2" type F adapter ----SOLD
1/2" dust cap
(stainless)
stainless smooth-band Worm drive hose clamp
5/8 to 1-16"
3/8" band width
(20 total, 2 packs 10 each)--- 1 BAG OF 10 LEFT

Picture 3 left paper
Digital panel meter amp with 50amp shunt 5VDC power supply ---SOLD
Volt 700vac, 5VDC power supply ---SOLD
3- XLR panel mount 3 pin ---SOLD
2 - 8 position terminal strips ---SOLD

Right paper:
5- 2 way selector switch 22mm ---SOLD


Would like to sell the whole lot, would like 120 for it all...

p3 (Medium).jpg


p2 (Medium).jpg


p1 (Medium).jpg
 
I'd be interested in the o rings, washers, and reducing bushings of you decide to break it up
 
if you split I will take the terminal strips, 1 XLR, and 1 2 way 22mm selector switch (all in picture 3)
 
Updated list*

----5 nipples, 1/2" npt stainless 1" long

----1 bag of worm drive hose clamps, (for clamping 1/2" silicone hose without binding)

--- 2 -Hex Reducing bushings
304 stainless threaded pipe fitting
1/2" male x 1/4" female

thats whats left...make a offer..
 
Back
Top