Sight gauge on MLT

spoonyluv · Jul 11, 2011

Hi,
I'm thinking of putting a sight gauge on my keggle MLT to measure strike water and to make sparging flow control easier. Is this a good idea?

If I do go this route, any ideas on a filter or strainer for the fitting (1/2") that will help keep various particles from the sight gauge tube?

Thanks!

Spoony

Bobby_M · Jul 11, 2011

I've had one on my MLT for the same purpose and I never got anything stuck in the tubing. If you wanted to add a rough strainer, I could probably come up with some ideas if you told me how you were attaching your sight to the vessel.

spoonyluv · Jul 12, 2011

I've got a 1/2" coupling welded half into the MLT, the outer half connects to the usual compression fitting for the sight glass, the inner half is available. Is that workable? maybe a hex nipple with a mesh screen soldered onto it?

Bobby_M · Jul 12, 2011

I'd just wrap a piece of stainless screen over the open end and hold it on with a hose clamp. You can probably also do the same with those stainless lint traps.

spoonyluv · Jul 12, 2011

Thanks, that seems like a good simple way to go. Time to hit the hardware store.

Sight gauge on MLT

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

spoonyluv

Supporting Member

Bobby_M

Vendor and Brewer

spoonyluv

Supporting Member

Bobby_M

Vendor and Brewer

spoonyluv

Supporting Member

Similar threads

Latest posts

Sight gauge on MLT

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

spoonyluv

Supporting Member

Bobby_M

Vendor and Brewer

spoonyluv

Supporting Member

Bobby_M

Vendor and Brewer

spoonyluv

Supporting Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!