Pouring from a Corney Keg?? Pressure?

Brewer's Friend 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

Mainer28

Well-Known Member
Joined
Feb 19, 2010
Messages
73
Reaction score
1
Location
MA
So my beer is at equilibrium with my regulator at 12psi. Am I suppose to release the pressure to 3-4psi for pouring purposes? Because the beer is coming out like a rocket and is too foamy.

Thanks all,

Mainer
 
If it comes out too foamy, release some pressure or get yourself a longer hose.
 
I've consistently had this problem, My conclusion is to get longer hoses (currently around 4-5 feet) My biggest issue is how to get the top off my damn tower without damaging it >(
 
It depends on what you are serving from. Kegerator with 10-12ft lines should not foam much but serving from a 2ft line with a picnic tap at a party usually use 2-3 psi.
 

Similar threads

C
Hop Water/Seltzer - Troubleshooting Carbonation and Dispensing
Replies
6
Views
741
danno6102
D
B
Little carbonation after a week in the keg.
Replies
2
Views
315
doug293cz
doug293cz
N
Foam- All of a Sudden
Replies
15
Views
2K
IslandLizard
IslandLizard
Mutt98
Foaming problem (but only from one keg)
Replies
12
Views
1K
faithie999
F
P
Kegerator / regulator issue? - beer not flowing properly and I'm out of ideas
Replies
30
Views
1K
day_trippr
day_trippr
InkBird 300

Latest posts

Back
Top