The Pale Horse
Well-Known Member
Disclaimer: I have no experience painting, bondoing, sanding, really a whole lot of anything. So this was full of a lot of firsts. I am happy the way it turned out, I am still not done, but I'll post those pics when it is completed
We'll start at the beginning.....the kegerator I got off craigslist for $30
Put some wheels on it
Filled in the holes with some foam that way I could Bondo later
Sanded it down to remove some of the previous paint and also so I could Bondo over the old holes
There were two pretty big dents on the one top side so I decided that I would Bondo those while I was at it
I used the wire brush from a Dremel and took most of the grime off the top plate
We'll start at the beginning.....the kegerator I got off craigslist for $30
Put some wheels on it
Filled in the holes with some foam that way I could Bondo later
Sanded it down to remove some of the previous paint and also so I could Bondo over the old holes
There were two pretty big dents on the one top side so I decided that I would Bondo those while I was at it
I used the wire brush from a Dremel and took most of the grime off the top plate