squeekysheep
Well-Known Member
i was wondering since i can't get any ss 5/8ths fender washers if anyone sees a issue with me buying a 1/2 ss fender washer and using a drill to make it fit.
flyguy's 10gal MLT & 5/8th ss fender washer
- Thread starter squeekysheep
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Choguy03
Well-Known Member
If you go to home depot, there is an orange clear package called "Create-A-Bolt". It has 5/8 ss washers and some nuts and lock washers. I was 4 of each but only cost $4. If you can't find that I would think you should be able to drill it out though.
squeekysheep
Well-Known Member
guess thats worth a try. have you used these washers for a MLT?
Choguy03
Well-Known Member
Yep and it works great.
Hard to see them but there they are in action.
Hard to see them but there they are in action.
squeekysheep
Well-Known Member
my home depot didn't have the, time to start drilling
Fastenal carries the washers, both online and in their stores.
I picked up a 10 pack of 5/8 Stainless flat washers, for $8.40
http://www.fastenal.com/web/products/detail.ex?sku=1171026
Home page http://www.fastenal.com/web/home.ex They have a store loactor on their page.
The stores are awsome by the way.
I picked up a 10 pack of 5/8 Stainless flat washers, for $8.40
http://www.fastenal.com/web/products/detail.ex?sku=1171026
Home page http://www.fastenal.com/web/home.ex They have a store loactor on their page.
The stores are awsome by the way.
Choguy03
Well-Known Member
Stupid ass Home Depot. Sorry for making you run out to the store with nothing in return.
squeekysheep
Well-Known Member
woot there is a fastenal in my town they had them instock
I posted in another thread but I'll repost here... If you're really hard up for a stainless steel 5/8" washer, PM me and I'll pick one up for you and mail it to you next time I'm at ACE Hardware. I don't remember how much they were, but I'm thinking $2 including postage will probably cover it.
Great! There's a fastenal near me. Several stores in the area, in fact. And, best of all, they have the MC300 series moldmate-compatible Tomco brand brass 3/8th body by 1/2" barb quick disconnects that many of us have been ordering from McMaster Carr. And the price is about the same.
3/8"x1/2"(Push-On)Hose Straight Stem Brass Mold Couplers
3/8"x1/2"(Push-On)Hose Straight Stem Brass Mold Couplers
squeekysheep
Well-Known Member
what do you use those for
Similar threads
