Just finished my kegerator

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jeepinctbrewer

Well-Known Member
Joined
Jan 1, 2012
Messages
606
Reaction score
43
Location
Hartford
Just need to install my drip tray, my 5 gallon keg just fits with the freezer tray removed. What do you guys think? Did I miss anything ?

image-2845437201.jpg


image-2655900970.jpg


image-3118526416.jpg


image-2863312291.jpg
 
What is the best way to test the system out?
Just fill the keg with water and run co2 to it ?
And run the faucet a few times and check for leaks ? Thanks
 
Sure, that would work to check for leaks. I didn't really wait much, I had batches waiting to be kegged so I put'em in there and worked through the inevitable issues. For one, the guy at the brew store sold me 1/4" beer line, way too big and foamed like crazy into the glass. People here set me straight, so I got 10 feet of 3/16 for each tap, worked like a charm. Stuff like that is hard to trouble shoot with water.
 
I got 3/16 beer line about 4' might have to change, I didn't know about the foot per pound till after I picked up the line
My co2 line is big od 9/16
 
Back
Top