time2trade
Member
- Joined
- Aug 25, 2010
- Messages
- 11
- Reaction score
- 0
Just bought a dual product regulator. Attached to my CO2 tank, tightened everything up/ clamped all my connections tightly. Turned on the tank and the CO2 seems to just blow out of the second pressure release valve (furthest from tank).
I assumed the regulator was pretty straight forward, but besides concluding that I got a regulator with a bum valve, what steps can I take to prevent / remedy this if any? I pulled on it to see if it was stuck, but it springs back into place. I double checked all my connections and tightened them as much as I could.
I attached a couple of pics. Any suggestions would be greatly appreciated. It feels like something straight forward i'm missing that a noob would do, such as myself...
Bheers!
I assumed the regulator was pretty straight forward, but besides concluding that I got a regulator with a bum valve, what steps can I take to prevent / remedy this if any? I pulled on it to see if it was stuck, but it springs back into place. I double checked all my connections and tightened them as much as I could.
I attached a couple of pics. Any suggestions would be greatly appreciated. It feels like something straight forward i'm missing that a noob would do, such as myself...
Bheers!