• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

California Keggle BK, HLT and recirculating IC for sale

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lpdjshaw

Well-Known Member
Joined
Jun 17, 2011
Messages
422
Reaction score
22
Location
North County, San Diego
Custom built keggles for sale, one is set up for use as an HLT and the other a boil kettle. I've used nothing but the best parts on these and did all the work on them myself. Top cutouts are exactly 12" with no sharp edges and lids are included on both. I have been brewing with these for about two years with zero problems. They have been wet sanded down to 400 so it wouldn't take too much to really polish these babies if you wanted to. Here's the rundown on the parts I used:
* 1/2" Polarware one piece ss bulkhead (http://www.northernbrewer.com/shop/polar-ware-bulkhead.html)
* 1/2" ss valve and nipple
* 3" face Fermentap thermometer (http://morebeer.com/products/dial-thermometer-3-face-2-probe.html - one very nice feature on these is they don't need to be removed to adjust them, the adjustment screw is facing the side)
* 1/2" ss compression fitting and dip/pick-up tube.
* In addition, the HLT is outfitted with a calibrated Bobby M sight gauge.

The immersion chiller - (http://morebeer.com/products/wort-chiller-superchiller-recirculation.html). Lid on BK is cutout for the IC.

So, as you can see I have $200+ each into these keggles plus hours of work. Asking $225 for the BK, $250 for the HLT and $85 for the chiller. $500 for all three. I have an unmodified matching keg that could go with this system as a MT that I am offering for sale as well. I would be able to do the top cutout as well as any holes if requested.

I also have an 11 gal. ss lined Rubbermaid MT that is customized to the max, photo's are in my gallery. Inquire if interested.

photo-23.jpg


photo-22.jpg


photo-19.jpg


photo-20.jpg


photo-21.jpg
 

Latest posts

Back
Top