Crypto_Sailor
Member
Hello guys/gals I have a few questions IRT the SQ-14 burner. I've read quite a few post about people having luck changing the PSI regulator from 10psi to 15-20psi to acheive a higher BTU rate. But when I asked BayouClassicStore.com if it was possible to exchange a 10psi regulator for a 15-20psi regulator his reply to me was
Hi Brian,
The SQ14 comes with the 10 PSI regulator, and we no longer carry a 15 or 20 PSI regulator. I'm sorry but the 10PSI is the best option for the SQ14. If you go to a larger regulator it will blow the flame out on that burner.
Thank you,
Justin
So far I'm overall pleased with the quality of the burner; however I'd like to get a little more out of the burner for the cheapest amount of money possible. Has anyone had luck with changing out regulators?
R/
Brian
Hi Brian,
The SQ14 comes with the 10 PSI regulator, and we no longer carry a 15 or 20 PSI regulator. I'm sorry but the 10PSI is the best option for the SQ14. If you go to a larger regulator it will blow the flame out on that burner.
Thank you,
Justin
So far I'm overall pleased with the quality of the burner; however I'd like to get a little more out of the burner for the cheapest amount of money possible. Has anyone had luck with changing out regulators?
R/
Brian