• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Pennsylvania Complete 1/2 Barrel Brewery

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

urbangravity

Well-Known Member
Joined
Jun 18, 2012
Messages
81
Reaction score
4
Location
Lancaster
Complete 1/2 Barrel Brewery. Everything going for $6,200. Over $9000 invested in materials alone. Only 15 batches brewed on system. $50 home-brew store gift card added bonus.


Stainless Steel Brewing Stand

• All Stainless Steel Stand with Optional Locking Rollers
• SS LP Tank Rack
• 3 – Temperature Probes (1 on each tank)
• 3 - BG14 10”, 210,000 BTU Burners
• 2 – Stainless Steel Chugger Pumps
• 1 – 60 Plate Wort Chiller
• BCS460 Brewery Control Computer
• 3 – Electronically Controlled Fuel Valves
• 3 – Electronically Controlled Burner Starter
• Steel Control Box
• Wifi Adapter (hardwire option)
• All New Wiring and Conduit Housing

Brewing Vessels

• 1 – 20 Gallon SS Hot Liquor Tank with Site Glass (serves as cold tank for chilling) with Lid
• 1 – 20 Gallon SS Mash Lauter Tun with Sparge Coil in Lid
• 1 – 20 Gallon SS Boil Kettle with Lid
• 3 – Analog Thermometers (optional use)
• 9 Gallon SS Grant with Lid (with 2 SS Tri Clover Fittings)

Brewery Hardware

• SS Fittings (on kettles and stand):
o 6 – SS Ball Valves
o 6 – 1.5” x ½” Female SS Tri Clover NPT
o 16 – 1.5” x ½” Male SS Tri Clover NPT
o 4 – ½” SS T Fittings
o 11 – ½” SS Elbow Fittings
o 4 - 1/2" Compression Fitting
• 18 – 1.5” SS Tri Clover Clamps
• 26 - 1.5” Silicone Gaskets
• 17 - 1.5” x ½” Barbed SS Fittings
• Rotating ½” SS CIP Spray Ball
• ½” x 12” SS Bazooka Screen
• SS Brewing Table
• SS Brew Paddle
• Kettle Volume Stick
• SS Brew Spoon
• 9 – ½” Silicone Transfer Hoses (variance lengths)


Fermentation Vessels

• 1 – 20 Gallon SS Fermenter on Rollers with Thermowell and Ball Valves
• 2 – 15 Gallon Blue Carboy Fermenters
• 2 – Plastic 5 Gallon Bottling Buckets with Spouts and Lids
• 1 – Glass 5 Gallon Carboy with Neck Handle
• 1 – New 3 Gallon Better Bottle Fermenter

Ultimate Grain Mill

• Monster Brewing Hardware MM3 – Three Roller Mill
• Base and Hopper
• Forward and Reverse Motorized Drive
• Steel Stand on Rolling Locking Wheels
• Grind Bucket Included

Supplies and Misc

• Airlocks
• Rubber Stops
• Siphon Cane
• Red Barron Capper
• Hops (Citra, Simcoe, Nugget, Cascade)
• Caps
• Bottles

Kegging Equipment

• Inline Beer Transfer Filter with Fitting (extra cartridges)
• New Upright Converted Refrigerator (holds 3 Corny Kegs)
o 3 Installed Chrome Plated Brass Taps
o 3 Line Manifold with Valves
o 3 Tap SS Drip Tray with Waste Line
• Dual Gauge Regulator with 5 Pound Co2 Tank
• All Beer Lines
• All Gas Lines
• 3 – 5 Gallon SS Corny Kegs
• 2 – 2.5 Gallon SS Corny Kegs
• 1 – 3 Gallon SS Corny Keg
• 1 – Amercian Sanke Keg Head Coupler
• Gas and Liquid Disconnects (Sets)
• Co2 Keg Charger

P1040049.jpg


P1040051.jpg


P1040048.jpg


P1040052.jpg


P1040057.jpg
 
Id be interested in the 2.5 corny and bcs460, wifi adapter and temp probes if you decide to sell these individually
 
rtrevino said:
Id be interested in the 2.5 corny and bcs460, wifi adapter and temp probes if you decide to sell these individually

Thanks for the post. Im going to keep it as a package. Parting it out would to much detail and time
 
Beautiful job on the grain mill.
If you want to sell that part let me know. If not thanks for a great idea.
 
I can't tell from the pictures but I am assuming all the ports are welded. Is this correct?
 
For everyone. The brewery is in Lancaster, PA and I won't be parting out the system out. I was in Chicago when I registered and move back east.
 
Good question that I ask myself a couple times. I love brewing however my life has taken a different direction and there will be no time for it. Last thing I need is to have a great system starring my in the face everyday or for another couple weeks or months to get back what I have in it. Priced for quick sale.
 
Good question that I ask myself a couple times. I love brewing however my life has taken a different direction and there will be no time for it. Last thing I need is to have a great system starring my in the face everyday or for another couple weeks or months to get back what I have in it. Priced for quick sale.

I feel for ya... I was looking at the SABCO BM recently until I came across your post. Being in Philly your location is a breeze for self pick-up. Need to consult with my accountant on this one.
 
Thanks to all who were interested and PMd me regarding the complete brewery. The fermentation vessels and the ultimate grain mill have been sold. The 1/2 barrel brew sculpture and the complete kegerator packages are still listed as PARTING OUT. This thread will be closed.

Happy Brewing!
 
Status
Not open for further replies.
Back
Top