Pro Mash Question

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
redrider736

redrider736

Well-Known Member
Joined
Jun 18, 2011
Messages
142
Reaction score
4
Location
London
Tying to figure out all the different Brewing terminology and use a few brewing software ads that are out there.

Just wanting to understand how I figure my Strike Temp with my Grain Bill.

Pro Mash is asking for a " LT Thermal Mass" ??
 
redrider736 said:
Tying to figure out all the different Brewing terminology and use a few brewing software ads that are out there.

Just wanting to understand how I figure my Strike Temp with my Grain Bill.

Pro Mash is asking for a " LT Thermal Mass" ??
Click to expand...

I could be totally wrong but i think thats what material it is and with a giving value "what ever it is" will effect your temps like a rubbermaid cooler will loose heat slower then a ss pot...
 
SCUD_Brew said:
just pre-heat your tun and set the values to 0 (no thermal loss).....good to go and very accurate this way.
Click to expand...

+1 to this. ProMash has been right on for strike temp and mash temp. I generally preheat the water to 175F and transfer to the mash tun for heating and measure the water temperature periodically until it's down to the strike temperature.
 

Similar threads

Gadjobrinus
Beer Smith - strike temps way low?
Replies
27
Views
1K
Brooothru
Brooothru
fljim
Mash extract efficiency
Replies
2
Views
520
fljim
fljim
S
Rice Mash Method
Replies
22
Views
2K
passedpawn
passedpawn
hotbeer
What if you bring the malts slowly to mash temp?
Replies
14
Views
1K
hotbeer
hotbeer
F
can i mimic corn or rice adjunct by lowering my mash temps
Replies
20
Views
739
day_trippr
day_trippr
BrewSwag 300

Latest posts

Back
Top