ironmountainbrew
Active Member
I'm hoping to get feedback on the layout and functions of my control panel. My plan is to be able to run 2 - 5500 watt elements along with two pumps at the same time. I want to power on the PIDs with the main power switch.
The PIDs I'm using have built-in timers, so I'm including a reset button for each.
Here's a rundown of the panel switches and LEDs
Please let me know if I'm missing anything obvious.
Also, It would be great if someone happened to have a wiring diagram that fit this build.
Thanks in advance.
The PIDs I'm using have built-in timers, so I'm including a reset button for each.
Here's a rundown of the panel switches and LEDs
- 22mm LED - [1 - green (power), 1 - red (alarm), 2 - blue (pumps)]
- 22 mm Flashing Buzzer
- 22 mm LED Push button Switch - [2 - yellow (elements)]
- Push button Switch, Momentary - [2 - red (PID Alarm Reset)]
- Emergency Stop locking push button
- 2-Way Switches [ 2 - pumps, 1 - alarm]
- Key toggle Switch (panel on/off)
Please let me know if I'm missing anything obvious.
Also, It would be great if someone happened to have a wiring diagram that fit this build.
Thanks in advance.